When it comes to wig customization, dyeing is a popular technique that allows you to achieve stunning hair color transformations. If you’re looking to transform a 613 wig into a beautiful honey blonde, you’re in the right place. This comprehensive guide will take you through the step-by-step process of dyeing a wig to achieve that desired honey blonde hue. With careful preparation, the right materials, and a bit of patience, you’ll be able to enjoy a fabulous new look.
Understanding the 613 Wig and Honey Blonde Shade.
A 613 wig refers to a wig that is made from hair that has been pre-lightened to a very light blonde shade, often referred to as “platinum blonde” or “bleach blonde.” The number 613 is a standard color code used in the hair industry to represent this specific shade of blonde.
Honey blonde, on the other hand, is a warm, golden-toned shade of blonde that resembles the color of honey. It is a popular choice for those who want a softer, more natural-looking blonde hue. Honey blonde shades can vary in intensity, ranging from light and subtle to deeper, more vibrant tones.
When dyeing a 613 wig to achieve a honey blonde shade, it’s important to note that the starting point of the wig is already very light, which makes it easier to achieve the desired honey blonde color. However, since the wig is pre-lightened, it may be more porous and prone to damage, so extra care should be taken during the dyeing process to maintain the integrity of the wig.
To achieve the perfect honey blonde shade, it’s essential to consider the undertones and tonal qualities you want in your final result. Honey blonde can have warm golden undertones, sometimes with hints of red or copper, or it can lean towards cooler, ashier tones. Determining the specific undertones you desire will help you choose the appropriate dye and developer combination to achieve your desired honey blonde hue.
It’s also worth noting that the final color result can vary depending on the quality and type of hair used in the wig, as well as the dyeing technique and products used. It’s always recommended to conduct a strand test before dyeing the entire wig to ensure that the color outcome meets your expectations.
Preparing the Wig for Dyeing.
Before diving into the dyeing process, it’s crucial to prepare the 613 wig properly to ensure optimal color results. Here are the steps to follow when preparing the wig for dyeing:
Detangle the Wig:
Gently comb through the wig using a wide-toothed comb or a wig brush to remove any knots or tangles. Start from the ends and work your way up to avoid causing unnecessary damage to the hair fibers.
Wash the Wig:
Fill a basin or sink with lukewarm water and add a mild shampoo specifically formulated for color-treated or synthetic wigs. Submerge the wig in the water and gently swirl it around to distribute the shampoo evenly. Avoid rubbing or twisting the wig, as this can lead to tangling or matting. Rinse the wig thoroughly with clean water until all the shampoo is removed.
Condition the Wig:
After washing, apply a wig-specific conditioner to the hair, focusing on the mid-lengths and ends. Leave the conditioner on for the recommended time stated on the product instructions to ensure the hair fibers are nourished and moisturized. Rinse the wig thoroughly to remove all traces of the conditioner.
Towel Dry the Wig:
Gently squeeze out excess water from the wig without rubbing or wringing it. Place a clean, dry towel on a flat surface and lay the wig on top of it. Gently blot the wig with the towel to absorb moisture and speed up the drying process. Avoid vigorous rubbing, as this can cause frizz and damage the hair fibers.
Air Dry the Wig:
Allow the wig to air dry completely in a well-ventilated area. Avoid using heat sources such as hair dryers or direct sunlight, as these can damage the wig fibers. It’s best to place the wig on a wig stand or mannequin head to help maintain its shape during the drying process.
Detangle Again:
Once the wig is dry, gently comb through it again to ensure there are no remaining tangles or knots. Start from the ends and work your way up, using a wide-toothed comb or wig brush specifically designed for wigs. Be patient and gentle to prevent any unnecessary breakage.
Protect the Hairline and Cap:
Before proceeding with the dyeing process, it’s advisable to protect the hairline and cap of the wig. Apply a thin layer of petroleum jelly or a wig-specific protective barrier product along the hairline and on any areas of the cap that may come into contact with the dye. This will prevent staining and make the cleanup process easier.
Choosing the Right Dye and Developer.
Choosing the right dye and developer is crucial when dyeing a 613 wig to achieve a honey blonde shade. Here are some factors to consider when selecting the appropriate products:
Selecting the Dye:
When choosing a dye, opt for a shade that specifically states “honey blonde” on the packaging or has warm golden undertones. Look for dyes labeled as suitable for use on pre-lightened or blonde hair. It’s important to note that different brands may have slightly different interpretations of honey blonde, so check the color swatches on the packaging or consult with a professional if needed.
Consider Your Desired Undertones:
Determine whether you prefer a honey blonde shade with warm golden undertones or if you lean towards cooler, ashier tones. This will help you select a dye with the appropriate undertones. If you want a warmer honey blonde, choose a dye with hints of red, copper, or golden tones. For cooler honey blondes, opt for dyes with ash or beige undertones.
Type of Dye:
There are two primary types of hair dye: permanent and semi-permanent. Permanent dyes provide longer-lasting results as they penetrate the hair shaft and change the color permanently. Semi-permanent dyes deposit color onto the hair cuticle without altering its structure and gradually fade over time. Consider whether you want a more long-lasting color or if you prefer a temporary option that allows for easier color changes in the future.
Quality and Brand:
Choose a reputable brand known for producing high-quality hair dyes. Quality dyes tend to provide better color payoff, lasting power, and less damage to the hair fibers. Reading reviews, seeking recommendations, and researching the brand’s reputation can help you make an informed decision.
Developer Strength:
The developer, also known as the activator or oxidizing agent, is mixed with the dye to create the desired color result. For a 613 wig, which is already pre-lightened, you may need to use a lower volume developer to avoid over-processing the hair. A 10 or 20 volume developer is usually sufficient for depositing color without causing excessive damage. However, if you desire a more intense honey blonde shade or need to lift the color slightly, you may opt for a 30 volume developer. It’s important to follow the instructions provided by the dye manufacturer regarding the recommended developer volume for best results.
Consider the Wig’s Material:
If you have a synthetic wig, you need to choose a dye specifically formulated for synthetic hair. Synthetic dyes are designed to adhere to the synthetic fibers and provide a vibrant color result. For human hair wigs, you can use regular hair dyes formulated for use on pre-lightened hair.
Strand Testing and Mixing the Dye.
Before dyeing the entire 613 wig, it’s crucial to perform a strand test to ensure the desired color result and to determine the ideal processing time. Additionally, understanding how to properly mix the dye and developer is essential for achieving consistent and accurate color. Follow the steps below for strand testing and dye mixing:
Strand Testing:
Choose a small section of hair from the wig, preferably from an inconspicuous area such as the underside or a lower layer of the wig.
Prepare the dye mixture according to the manufacturer’s instructions, using the dye and developer in the recommended ratio. Mix the dye and developer thoroughly until they are well combined.
Apply the dye mixture to the selected strand of hair, ensuring complete saturation from root to tip. Use a color brush or gloved hands to distribute the dye evenly.
Follow the recommended processing time provided by the dye manufacturer. Keep in mind that processing times can vary depending on the brand and the desired color intensity.
Monitor the strand closely during the processing time to observe the color development. Note any changes in shade or undertones.
After the processing time is complete, rinse the strand with lukewarm water until the water runs clear. Avoid rubbing or scrubbing the hair vigorously to prevent potential damage.
Allow the strand to air dry completely. Evaluate the color result under natural lighting to determine if it matches your desired honey blonde shade. Take note of the processing time required to achieve the desired result.
Dye Mixing:
Read and follow the instructions provided by the dye manufacturer for the specific dye and developer you are using.
Start by wearing gloves and preparing a non-metallic mixing bowl or container.
Measure the appropriate amount of dye and developer according to the recommended ratio specified by the manufacturer. Typically, it is one part dye to one part developer.
Pour the measured dye and developer into the mixing bowl or container. Ensure the dye and developer are thoroughly combined by stirring gently with a color brush or mixing tool.
Continue stirring until the mixture is smooth and consistent in color. Avoid creating air bubbles by stirring gently.
Once the dye and developer are mixed, use the mixture immediately for the application process to ensure optimal color results.
Applying the Dye to the Wig.
Applying the dye to your 613 wig requires care and precision to ensure even color distribution and a beautiful honey blonde result. Follow these steps to properly apply the dye:
Prepare Your Workspace:
Set up your workspace with all the necessary supplies, including gloves, a color brush or applicator bottle, clips or hair ties to section the wig, and a towel or plastic covering to protect the surrounding area.
Section the Wig:
Divide the wig into manageable sections using clips or hair ties. This will make the application process more organized and ensure that every strand is coated with the dye. Start by parting the wig down the middle, then divide it into smaller sections horizontally.
Start at the Nape:
Begin dyeing the wig from the nape of the neck and work your way upward. Take a small subsection of hair from the first section and apply the dye from roots to ends, making sure to saturate the hair completely. Use a color brush or applicator bottle for precise application.
Continue Section by Section:
Move through each section of the wig, applying the dye systematically. Work from the roots to the ends, making sure to coat each strand evenly. Pay extra attention to the hairline and the front sections, as these areas are more visible and require precise application.
Comb Through the Hair:
After applying the dye to each section, gently comb through the hair using a wide-toothed comb or a color brush to ensure even distribution of the dye. This helps eliminate any potential streaks or patchy areas.
Check for Missed Spots:
Once you’ve applied the dye to the entire wig, carefully inspect for any missed spots or areas that appear lighter. Use a color brush or gloved fingers to touch up those spots, ensuring all hair is thoroughly saturated with the dye.
Monitor Processing Time:
Refer to the strand test results and follow the recommended processing time provided by the dye manufacturer. Keep in mind that the processing time may vary depending on the desired color intensity and the specific dye brand. Set a timer and monitor the wig closely to avoid over-processing.
Rinse the Wig:
Once the processing time is complete, rinse the wig with lukewarm water until the water runs clear. Gently squeeze out the excess water, taking care not to rub or wring the hair.
Condition the Wig:
Apply a wig-specific conditioner or a deep conditioning treatment to restore moisture and nourish the hair after dyeing. Leave the conditioner on for the recommended time and then rinse thoroughly.
Pat Dry and Style:
Gently pat the wig dry with a towel to remove excess moisture. Avoid rubbing, as it can cause frizz and damage to the hair fibers. Allow the wig to air dry on a wig stand or mannequin head. Once dry, style the wig as desired.
The Dyeing Process: Waiting and Rinsing.
After applying the dye to your 613 wig, the next crucial steps are waiting for the color to develop and rinsing the wig properly. These steps are essential to ensure a beautiful and even honey blonde result. Follow the guidelines below for the dyeing process:
Waiting Time:
Refer to the instructions provided by the dye manufacturer for the recommended waiting time. This waiting period allows the dye to process and develop the desired honey blonde shade. Set a timer to ensure accuracy and avoid over-processing.
Monitor the Color Development:
During the waiting time, periodically check the wig to monitor the color development. Keep in mind that the color may appear darker while the dye is processing. Take note of any changes in shade or undertones and compare them to your desired honey blonde result.
Check the Wig’s Porosity:
The waiting time may vary depending on the porosity of the wig. If the wig is highly porous, it may process faster, while less porous hair may require a longer waiting time. Porosity is affected by factors such as the quality of the wig’s hair, its condition, and previous treatments.
Rinse with Lukewarm Water:
Once the waiting time is complete and you are satisfied with the color development, it’s time to rinse the wig. Start by thoroughly rinsing the wig with lukewarm water until the water runs clear. Gently squeeze the hair to remove excess dye.
Avoid Using Shampoo:
After rinsing, avoid using shampoo during this initial rinse. Shampooing immediately after dyeing can strip away some of the color and affect the vibrancy of the honey blonde shade. You can opt to skip shampooing or use a color-safe shampoo in subsequent washes.
Condition the Wig:
Apply a generous amount of wig-specific conditioner to the hair, focusing on the mid-lengths and ends. Allow the conditioner to sit on the hair for the recommended time specified on the product instructions. This step helps restore moisture and keep the hair soft and manageable.
Rinse and Pat Dry:
Rinse the conditioner out thoroughly with lukewarm water until the water runs clear. Gently squeeze out excess water from the wig without rubbing or twisting. Pat dry the wig with a towel to remove excess moisture, being careful not to rub vigorously.
Air Dry and Style:
Allow the wig to air dry completely on a wig stand or mannequin head. Avoid using heat styling tools or exposing the wig to direct sunlight, as they can damage the hair fibers. Once dry, style the wig as desired.
Post-Dyeing Care for Your Honey Blonde Wig.
After dyeing your 613 wig to achieve a stunning honey blonde shade, it’s crucial to follow proper post-dyeing care to maintain the color, keep the hair healthy, and extend the longevity of your wig. Here are some essential tips for caring for your honey blonde wig:
Wait Before Washing:
It’s recommended to wait at least 24 to 48 hours before washing your newly dyed wig. This waiting period allows the color to set and helps prevent premature fading. Patience is key to ensuring the best color retention.
Use Color-Safe Products:
When washing your honey blonde wig, use color-safe or sulfate-free shampoos and conditioners. These products are specifically formulated to be gentle on colored hair and help prevent color fading. Avoid using harsh or clarifying shampoos, as they can strip the color from the wig.
Wash with Care:
Handle the wig delicately when washing to avoid tangling or damaging the hair fibers. Gently massage the shampoo through the hair using your fingertips or a wide-toothed comb. Rinse thoroughly with lukewarm water, ensuring all shampoo is removed.
Condition Regularly:
Conditioning is essential to keep the hair soft, manageable, and hydrated. Use a wig-specific conditioner or a deep conditioning treatment formulated for color-treated hair. Apply the conditioner from mid-lengths to ends, and leave it on for the recommended time specified on the product instructions. Rinse thoroughly.
Avoid Hot Water:
When washing or rinsing the wig, use lukewarm water instead of hot water. Hot water can strip the color and cause the hair fibers to become dry and brittle. Stick to cooler temperatures to preserve the vibrancy of the honey blonde shade.
Minimize Heat Styling:
Excessive heat styling can cause damage and color fading. Minimize the use of heat styling tools such as straighteners, curling irons, and blow dryers. If heat styling is necessary, use a heat protectant spray and set the tools to a lower temperature to reduce the risk of heat damage.
Protect from UV Rays:
Sun exposure can cause color fading, so protect your wig from direct sunlight. When outdoors for extended periods, consider wearing a hat or using a wig spray that offers UV protection. This will help maintain the vibrancy of the honey blonde shade.
Store Properly:
When not wearing your wig, store it properly to prevent tangling and preserve the color. Use a wig stand or mannequin head to maintain the wig’s shape. Avoid storing the wig in direct sunlight or in a humid environment, as this can affect the color and overall quality.
Gentle Detangling:
To prevent unnecessary breakage or damage, detangle the wig gently using a wide-toothed comb or a wig brush specifically designed for wigs. Start from the ends and work your way up, being patient and gentle.
Regular Maintenance:
Schedule regular maintenance sessions for your wig, including trims and deep conditioning treatments, to keep the hair in optimal condition. This helps maintain the overall health and appearance of the wig, including the honey blonde color.
Additional Tips and Tricks.
Achieving the perfect honey blonde shade for your 613 wig requires attention to detail and some additional tips and tricks. Here are some extra suggestions to enhance your dyeing experience and help you achieve the desired results:
Toning:
If you notice any unwanted brassiness or yellow tones in your honey blonde wig, consider using a toner specifically formulated for blonde hair. Toning can help neutralize unwanted undertones and create a more balanced and true honey blonde color.
Color Depositing Products:
To maintain the vibrancy of your honey blonde wig between dyeing sessions, consider using color depositing shampoos, conditioners, or hair masks. These products are specially formulated to add a hint of color with each use, helping to refresh and extend the life of your honey blonde shade.
Avoid Overlapping:
When performing touch-ups or re-dyeing your wig, avoid overlapping the dye onto previously colored sections. Overlapping can lead to excessive build-up and uneven color distribution. Instead, focus on applying the dye only to new growth or areas that require refreshing.
Deep Conditioning Treatments:
Treat your honey blonde wig to regular deep conditioning treatments to keep the hair nourished, hydrated, and in optimal condition. Deep conditioning can help minimize damage, reduce frizz, and enhance the overall appearance and longevity of your wig.
Protecting the Color at Night:
Before going to bed, loosely braid or wrap your wig in a silk or satin scarf or use a silk or satin pillowcase. This helps minimize friction and prevent color rubbing off onto cotton pillowcases, which can cause color fading over time.
Avoid Chlorinated Water:
Chlorinated water, such as that found in swimming pools, can cause discoloration and damage to your honey blonde wig. If you plan on swimming, protect your wig by wearing a swim cap or keeping the hair covered with a waterproof wig cap.
Congratulations!
By following this comprehensive guide, you’re now equipped with the knowledge and steps necessary to dye a 613 wig into a stunning honey blonde shade. Remember, practice makes perfect, so don’t be afraid to experiment and explore different dyeing techniques to achieve your desired results.
